
Dolby
®
DM100 User’s Manual
3-1
Chapter 3
Operation: Status Mode
After power-on, the DM100 defaults to Status mode, with the
top-level main status screen displayed. Status mode is used for
displaying, monitoring, and analyzing the input bitstream.
Note: References to the front-panel buttons are shown using brackets
throughout this manual (e.g., “[Status]”). References to multiple-button
combinations mean sequences, not simultaneous button presses. Press
the first button, release, and then press the next button.
3.1 Main Status Screen
The main status screen is the top level of the status menu tree. It
displays one of the following possible combinations of
information. The display shown below gives a typical example:
The following pages describe the information displayed on the
second line for each type of input data.
Dolby Digital B
3/2L 448kbps
Active Input Connector
A
Set to Autodetect
B
Set to BNC
X
Set to XLR
O
Set to Optical
Input Data Type
Dolby E
Valid Dolby E bitstream
Dolby Digital
Valid 32-bit Dolby Digital
bitstream
DD/PCM
Valid 16-bit Dolby Digital
packed in Left channel
PCM/DD
Valid 16-bit Dolby Digital
packed in Right channel
DD/DD
Two valid Dolby Digital
bitstreams
PCM
Valid PCM bitstream
NULL data
NULL data type bitstream
Pause data
Pause data type bitstream
Data Type X
Other data type bitstream
No Input
No incoming bitstream
Komentáře k této Příručce